Banner

Intoxalock Calibration and Removal: Your Complete Guide to Safe Driving.

Intoxalock Device

In today's world where road safety is a top priority, devices like the Intoxalock have revolutionized the way the consequences of driving under the influence of alcohol (DUI) are addressed. These ignition devices act as gatekeepers, preventing a vehicle from starting if the driver has a blood alcohol level above the legal limit. However, to ensure maximum effectiveness and reliability of the Intoxalock, regular maintenance and calibration is essential. That's why, below, we'll explore in depth the importance of these processes, giving you valuable information to keep your Intoxalock in top condition and ensure your safety on the road.

What is Intoxalock?

The Intoxalock is an ignition interlock device installed in a vehicle that requires the driver to provide a breath sample before starting the engine. This state-of-the-art device analyzes the breath sample to determine the driver's blood alcohol level (BAC). If the driver's BAC exceeds the preset legal limit, the vehicle will not start, thus preventing a person under the influence of alcohol from operating the vehicle.

How Intoxalock works

The Intoxalock is a very useful accessory that provides a great level of security, not only to drivers, but to the people around them. The way it works is as follows:

  • Starting the vehicle: Upon entering the vehicle, the driver must insert a valid key or ID card into the Intoxalock device. This action activates the BAC verification process.
  • Providing a breath sample: The device will ask the driver to provide a breath sample by blowing into the mouthpiece of the device. The mouthpiece is designed to ensure an accurate sample and prevent tampering.
  • BAC analysis: The Intoxalock uses high-precision sensors to analyze the breath sample and determine the driver's BAC. This process is done in a matter of seconds.
  • Vehicle starting: If the driver's BAC is below the preset legal limit, the vehicle will start without any problems. The driver can drive safely.
  • Vehicle lock: If the driver's BAC exceeds the preset legal limit, the vehicle will not start and the device will emit an audible and visual alarm signal. The driver will not be able to start the vehicle until his or her BAC is below the legal limit.

Intoxalock Uses

The Intoxalock is primarily used as part of a driver rehabilitation (SR) program for those who have been convicted of driving under the influence of alcohol (DUI). The device is installed in the driver's vehicle and remains there for a set period of time, which can vary depending on state laws and the severity of the offense. The primary purpose of the Intoxalock is to deter and prevent drivers from driving under the influence of alcohol, thereby promoting road safety and reducing the number of alcohol-related accidents.

Importance of Intoxalock Maintenance

Regular maintenance of the Intoxalock is crucial to ensure its proper functioning and reliability. A poorly maintained device can provide inaccurate BAC readings, which could lead to unsafe situations or even revocation of the driver's license.

Preventive maintenance of the Intoxalock includes:

  • Periodic inspections of the device components, such as the mouthpiece, sensors, and software.
  • Regular cleaning and disinfection of the mouthpiece to prevent the buildup of bacteria or contaminants.
  • Periodic calibration of the device to ensure the accuracy of BAC readings.

Importance of Proper Intoxalock Calibration

Calibration of the Intoxalock is essential to ensure the accuracy of BAC readings. Over time, the device's sensors can lose their sensitivity, which can result in erroneous readings. Periodic calibration ensures that the Intoxalock is functioning properly and providing reliable results.

Calibration of the Intoxalock must be performed by a qualified technician and using certified calibration equipment. The calibration process involves comparing the Intoxalock's readings to those of a known reference device and adjusting the Intoxalock's sensors accordingly.

Performance Tire & Wheel D’Iberville: Your Authorized Intoxalock Agent in South Mississippi

At Performance Tire & Wheel D’Iberville, we understand the importance of a properly functioning Intoxalock to road safety. As an authorized Intoxalock agent in D’Iberville, we have the experience and certifications necessary to provide you with complete maintenance and calibration services for your device as well as removal.

Our team of trained technicians uses state-of-the-art tools and equipment to ensure your Intoxalock stays in top condition. Plus, we offer convenient and flexible services to fit your schedule and needs.

With Performance Tire & Wheel, you can rest assured that your Intoxalock:

  • Is properly maintained to ensure reliable operation.
  • Is accurately calibrated to provide accurate BAC readings.
  • Meets all legal and driver rehabilitation program requirements.

Don't wait any longer, contact Performance Tire & Wheel D’Iberville today to schedule your Intoxalock device removal or calibration appointment!